diff --git a/HF-Rig_RX-Only/30m-USB_APRS.conf b/HF-Rig_RX-Only/30m-USB_APRS.conf
index 7b108fe..39f00de 100644
--- a/HF-Rig_RX-Only/30m-USB_APRS.conf
+++ b/HF-Rig_RX-Only/30m-USB_APRS.conf
@@ -9,7 +9,7 @@
 CHANNEL 4
 MYCALL {SSID HERE}
 ADEVICE plughw:1,0
-MODEM 1200
+MODEM 300 7@30
 ARATE 48000
 #PTT /dev/ttyUSB0 RTS (This is commented out, We are not Digipeating on HF as this is an RX-Only Igate)
 
diff --git a/README.md b/README.md
index 282a942..1817a86 100644
--- a/README.md
+++ b/README.md
@@ -38,6 +38,8 @@ Simplex 10m: `direwolf -c /home/$USER/aprs/Simplex-Support/direwolf_10m-APRS.con
 
 Cross-Band: `direwolf -c /home/$USER/aprs/Cross-Band_Support/direwolf_MultiBands.conf`
 
+30m RX Only `direwolf -c /home/$USER/aprs/HF-RIg_RX-Only/30m-USB_APRS.conf`
+
 Everyone's setup is different, Please ensure you have checked your 
 
 `PTT` method (If you're using an RPi your PTT method will be via the GPIO pins) 
@@ -132,11 +134,19 @@ IBEACON sendto=IG delay=1 every=180 via=TOOT
 After further testing sending `TOOT` 's via `IBEACON` won't work and need to be an `RF ONLY` sent packet
 I'll edit the configurations later on this week (1/2/24) to make sure this is properly fixed
 
+# (This was patched 2/4/24 but still can't send Packets over IBEACON ;-; )
+
 ## FURTHER Further notes (Edited: 2/4/24)
 The Mastodon beacon will not accept `IBEACON` and will only accept `RF ONLY (CBEACON)` This is something I need to speak to
 VK4XSS about at some point in time whenever that will occur and have this fixed 
-_______________
 
+## MORE NOTES (Why do I keep doing this to myself) (1:31am 2/5/24)
+I've now added support for 30 Meter APRS (RX ONLY) and will add more bands to this setup once I get some more time on my 
+hands and have the spoons to do so
+This is an RX Only I-Gate, If you get in trouble by Digipeating APRS packets over HF, It's not my fault.. You've gone and purposely added that to your config
+This should only be in emergency situations (As much as I would love to do this as a treat :P)
+_______________
+## Notes about HF APRS Functionality on RTL-SDR's
 
 Currently as far as I'm aware there is no easy way to get the RTL-SDR to run at 300 baud on Sideband for HF APRS
 
diff --git a/RTL-SDR_Support/Direwolf_RX-ONLY.conf b/RTL-SDR_Support/Direwolf_RX-ONLY.conf
index 261e0be..61cd715 100644
--- a/RTL-SDR_Support/Direwolf_RX-ONLY.conf
+++ b/RTL-SDR_Support/Direwolf_RX-ONLY.conf
@@ -39,5 +39,5 @@ IGLOGIN {SSID HERE} {PASSWORD HERE}
 # https://aprs.internaluse.net/@{Your Callsign Here}/
 # Do not attach your SSID "-#" to the end of your Callsign, Simply just your call as is :-)
 
-IBEACON sendto=IG delay=1 every=180 via=TOOT
+#IBEACON sendto=IG delay=1 every=180 via=TOOT (This doesn't work right now, Need to wait on VK4XSS to fix maybe?)