Added Direwolf config

This commit is contained in:
Harper Innes 2023-12-07 17:05:38 +11:00
commit 0985685211

186
direwolf-MultiBands.conf Normal file
View File

@ -0,0 +1,186 @@
#-----------------------------------------------------------------------#
# Hi there!, This is an All in One Direwolf Config, #
# This covers HF/10m/2/70, Some of the config is commented out so it - #
# it doesn't clash with other settings but you can change - #
# this to however your station is set-up. #
# Currently this is setup as a HF -> VHF I-Gate #
# A very special thanks goes to Emma/Everett (KX4AT) #
# for their amazing help putting this config together #
# and sparking my interest again in Packet Radio! #
# "Help! I'm trapped in a digipeater! :C (Direwolf 08.18.23)" -KX4AT-10 #
#-----------------------------------------------------------------------#
##################################
# Channels, SSID, PTT, Baud Rate #
##################################
#---------#
# HF APRS #
#---------#
CHANNEL 0
MYCALL {SSID HERE}
ADEVICE plughw:1,0
MODEM 300 7@30
ARATE 48000
#PTT /dev/ttyUSB0 RTS # We aren't TX'ing on HF
#----------#
# VHF APRS #
#----------#
CHANNEL 1
MYCALL {SSID HERE}
ADEVICE plughw:1,0
MODEM 1200
ARATE 48000
PTT /dev/ttyUSB0 RTS
# UHF and 10 Meter is commented out since we aren't using them right now
#----------#
# UHF APRS #
#----------#
#CHANNEL 2
#MYCALL {SSID HERE}
#ADEVICE plughw:1,0
#MODEM 9600
#ARATE 48000
#PTT /dev/ttyUSB0 RTS
#---------------#
# 10 Meter APRS #
#---------------#
#Frequency is 29.250 FM { DO NOT UNCOMMENT THIS OUT }
#CHANNEL 3
#MYCALL {SSID HERE}
#ADEVICE plughw:1,0
#MODEM 1200
#ARATE 48000
#PTT /dev/ttyUSB0 RTS
################
# KISS and AGW #
################
AGWPORT 8000
KISSPORT 8001
###############
# Digipeaters #
###############
#--------------------#
# Simplex Digipeater #
#--------------------#
# VHF Digipeat:
#DIGIPEAT 1 1 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
# UHF Digipeat:
#DIGIPEAT 2 2 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
# 10 Meter FM Digipeat:
#DIGIPEAT 3 3 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
#----------------------#
# Cross-Band Digipeats #
#----------------------#
#VHF -> UHF Digipeat:
#DIGIPEAT 1 2 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
# HF -> VHF Cross-Band Digipeat:
DIGIPEAT 0 1 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
# HF -> UHF Cross-Band Digipeat:
#DIGIPEAT 0 2 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
# 10 Meter -> VHF Cross-Band Digipeat:
#DIGIPEAT 3 1 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
# 10 Meter -> UHF Cross-Band Digipeat:
#DIGIPEAT 3 2 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
#############################
# Servers and Login Details #
#############################
IGSERVER euro.aprs2.net
#IGSERVER noam.aprs2.net
#IGSERVER aunz.aprs2.net
IGLOGIN {SSID HERE} {PASSWORD HERE}
###########
# BEACONS #
###########
#------------------#
# Internet Beacons #
#------------------#
PBEACON sendto=IG delay=3 every=5 symbol="digi" overlay=I lat={LAT HERE} long={LONG HERE} power={TX POWER HERE} height={HEIGHT ASL HERE} gain={ANTENNA GAIN HERE} comment="{COMMENT HERE}"
CBEACON sendto=IG delay=1 every=30 info="> {COMMENT HERE}"
IBEACON sendto=IG delay=1 every=15
#-----------------#
# Mastodon Beacon #
#-----------------#
# https://aprs.internaluse.net/@{Your Callsign Here}/
# Do not attach your SSID "-#" to the end of your Callsign, Simply just your call as is :-)
IBEACON sendto=IG delay=1 every=180 via=TOOT
#------------#
# RF Beacons #
#------------#
PBEACON delay=1 every=7 symbol="digi" overlay=I lat={LAT HERE} long={LONG HERE} power={POWER HERE} height={HEIGHT ASL HERE} gain={ANTENNA GAIN HERE} comment="{COMMENT HERE}" via=WIDE1-1,WIDE2-1
IBEACON delay=1 every=10 via=WIDE1-1,WIDE2-1
CBEACON delay=1 every=7 info="> {COMMENT HERE}"
############
# TX Paths #
############
#----------------------------------------------------------#
# This tells Direwolf what "Channel #" to Transmit out of. #
#----------------------------------------------------------#
# HF TX //ONLY ~EVER~ USE THIS IN CASE OF EMERGENCIES, ENSURE PTT IS ALSO UNCOMMENTED IN CHANNEL 0
#IGTXVIA 0 WIDE1-1,WIDE2-1
# HF -> VHF TX
# IGTXVIA 0 GATE,WIDE2-1
#----------------------------------------------------------------------------------------------------------------------#
# NOTICE: This is typically a standard HF Digipath, However... #
# This would cause your packet to be retransmitted onto VHF and THEN get digipeated once on 2 meters. #
# This can result in multiple reports entering the Internet system since an HF station may igate you directly off HF, #
# and then later a second copy of the posit reaches the Internet after being retransmitted on 2 meters #
# in one or more different locations, possibly hundreds or thousands of miles apart. #
# Note that long-delayed multiple copies of the same position report entering the APRS Internet System have, #
# at times, caused mobile stations viewed on APRS maps to "hyper-jump" back and forth as more #
# recent position reports get superseded by long-delayed older reports. #
#----------------------------------------------------------------------------------------------------------------------#
# VHF TX
IGTXVIA 1 WIDE1-1,WIDE2-1
# UHF TX
#IGTXVIA 2 WIDE1-1,WIDE2-1
# 10 Meter FM TX
#IGTXVIA 3 WIDE1-1,WIDE2-1
#---------------------#
# Transmission Limits #
#---------------------#
#IGTXLIMIT 1000 1000
#################
# END OF CONFIG #
#################